Telex Integrated Signal Processor ISP-100 Bedienungsanleitung PDF herunterladen (Seite 44)

5-2

10 July 1998

Figure 5-2

OS download request dialog.

Figure 5-1

OS mismatch dialog.

Updating the ISP-100’s Operating System

The updating of the operating system contained in the ISP-100’s flash

memory is usually required after loading a new version of VUE-IT on the

computer. A dialog box such as those in Figures 5-1 and 5-2 usually

indicates this.

The procedure is as follows:

1. Make sure both the computer and the ISP-100 are both turned off.

2. Connect the computer to the ISP-100.

3. Hold in the default switch located to the left of the power switch and turn

on the ISP-100. Continue to hold in the default switch until the LEDs turn

red and begin rotating. See Figure 2-1 item 6.

4. Turn on the computer and start the VUE-IT software. You should see a

dialog box similar to that in Figure 5-2.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 145 146

Keine Kommentare

Telex Integrated Signal Processor ISP-100 Bedienungsanleitung Seite 44